Innovation in Viticulture

Crawler operating machine UT 110

The ANDREOLI crawler UT 110 was construed especially for the use of a harvester. Pumps, wheel gears, PTO shafts gear and chassis components withstand several thousands of operating hours.

The cabine is ROBS certified and stands for the safety of the driver. The fully air-conditioned cabin offers the driver highest comfort on long days and during extreme weather- and climate conditions.

Hence the driver is protected from low and high temperatures and dust and plant protection products are held back by the activated carbon filter system. The air-suspended seat is electronically adjustable for tilt. Tall drivers over 1,90 m have enough space in the cabin as well.

A lot of tasks call for a precise driving control. The speed control allows the driver to separately save different speeds for driving forward and backwards which facilitates his work. The digital control of the pumps allows a specific adjustments during certain driving situations.

Since the harvester is only an attachment, the crawler can be used for almost every application in wine growing. It takes only 30 minutes to remove the harvester and to install the three-point power lift. Attachments of various manufacturers can be added. For foliage cutters, taper tapes etc. a turning device can be installed.

Technical Data


VM-R754 IE4 Turbo Diesel

Common rail intercooler

Number of cylinders / displacement

4 / 2970 cm³

Rated output

80 KW (109 PS)

Max. speed

2.600 U/min

Max. torque

420 at 1100 U/min

Exhaust gas cleaning

level IIIB / DOC + DPF

Performance/Power outputs

Working speed

0 - 9,0 km/h

max. climbing performance

75 %*

max. lateral slope gradient

30 %*

Hydraulic system


single-level hydrostatic drive

Hydraulic engine


Hydraulic pump


2-circle oil system

1x drive, 1x work

Hydraulic power lift

Kat.l with quick coupling

Control units

6x double-acting, 1x single-acting with flow divider, joystick control



1230 mm und 1430 mm


3200 mm

Height (with air conditioning)

2650 mm

Contact area of the chains

1930 mm

Chain width

300 mm

Tank capacity diesel

65 L


starting at 2750 kg (depending on equipment)

PTO shaft


540 U/min. electr. activation

Winch (optional)

winch with hydraulic drive

Pulling force

electronic regulation, 300-1500 kg

Cable length

150 m (optional up to 230m)

Comfort driver seat (Grammer MSG 93) with air suspension and tilt adjustment and integrated joystick control 

Cruise control with electronic pump control and HP pumps

Partial cabin (front- und back window)

optional: full cabin with heating and air condition

*climbing performance depends on ground and weather conditions as well as attachments